Painting Sculpture Spray Gun Polyurea Chemicals Cold Polyurea Spray Tools
Description of Cold Spray Polyurea Cartridge Elastomer
Features of Cold Spray Polyurea Cartridge Elastomer
Characteristics
Cold polyurea is applied with a simple spray gun, easy to apply, one person can operate it. It can be directly sprayed in the temperature above 25℃, use a microwave to heat the liquid material to 35℃ if the environment temperature below 25℃. The curing time is adjustable from 2-10 min, can be sprayed forming on any curve, vertical or slope surface, without sagging. The coating is flexible, compact and seamless, with excellent comprehensive physical properties, no powdery, no peel off or crack after long term outdoor use, it is resistant to any cold & hot impact and weather changing corrosion.
Technical parameters of Cold Spray Polyurea Cartridge Elastomer
Elongation | 472% |
Tensile strength | 17.8Mpa |
Volume solid content | 99% ±1% |
VOC | 0 |
Product Keywords | polyurea cartridge,fastkote? polyurea floor coating |
Color | Multiple colors as customers’ need |
Luster | glazed |
Density | 1.01g/cm3 |
Color Volume solid content | ≥98% |
VOC | 0 |
Recommended dry film thickness | 500-3000μm |
Theoretical coverage | 1.02kg/sqm (calculated by the above solids percentage andry film thickness of 1000 microns) |
Practical coverage | Allow appropriate loss rate |
Surface dry time | 3-5min |
Re-coating interval | ≤ 6h (20℃) |
Re-coating method | two component air sprayer |
Mix ratio | A:B=1:1 (by volume) |
Normal package | 1.6kg/set (part A: 0.82kg, part B: 0.77kg) |
Application temperature | 25-40℃ (use a microwave to heat the material to 35℃ wheapply in cold weather) |
Flash point | 200℃ |
Images of Cold Spray Polyurea Cartridge Elastomer
Contact Us at Any Time