Home
>
PRODUCTS
>
Polyurea Chemical
>
|
| Place of Origin | China |
| Brand Name | HIGHTOP |
| Certification | CE，EPA，ISO，TUV |
| Model Number | CNMC-950 |
Polyurea Chemicals 1500ml Two-Component Cold Polyurea Pneumatic Cartridge Spray Gun
Description of Cold Spray Polyurea Cartridge Elastomer
The Cartridge System liners offer a permanent protective barrier between your vehicle and the outside environment, safeguarding it from rust, dents, scratches, and corrosion. Sprayed up to 1/16” of an inch, the cartridge system is great for truck bed liners, small jobs and hard to reach places. This tough-as-nails bed liner provides your truck strong, great looking protection at a great value.
Features of Cold Spray Polyurea Cartridge Elastomer
Sprayed up to 1/16" of an inch
Good abrasion resistance
Excellent corrosion resistance
Very good chemical resistance
Reduces noise from vibration and impact
Excellent impact resistance
Technical parameters of Cold Spray Polyurea Cartridge Elastomer
| Color Multiple | colors as customers’ need |
| Luster | glazed |
| Density | 1.01g/cm3 |
| Volume solid content | ≥98% |
| VOC | 0 |
| Recommended dry film thickness | 500-3000μm |
| Theoretical coverage | 1.02kg/sqm (calculated by the above solids percentage and dry film thickness of 1000 microns) |
| Practical coverage | Allow appropriate loss rate |
| Surface dry time | 3-5min |
| Re-coating interval | ≤ 6h (20℃) |
| Re-coating method | two component air sprayer |
| Mix ratio | A :B=1:1 (by volume) |
| Normal package | 1.6kg/set (part A:0.82kg, part B:0.77kg) |
| Application temperature | 25-40℃ (use a microwave to heat the material to 35℃ when apply in cold weather) |
| Flash point | 200℃ |
Truck bed liners
Small repair jobs in difficult to reach places
Images of Cold Spray Polyurea Cartridge Elastomer
Contact Us at Any Time
